Value Collection P20267 Standard Clevis Pin 3/8 in Steel

Product Description

The VALUE COLLECTION P20267 is a standard clevis pin machined from 1010-1018 grade uncoated steel. It measures 0.375 inches in pin diameter and 2.375 inches in overall length (OAL), with a usable length of 2.219 inches and a cotter or snap ring hole sized at 0.156 inches. Clevis pins are load-bearing fasteners used to create a pivot or hinge point in clevis-and-yoke linkages. Maintenance technicians, millwrights, and general tradespeople install these pins in mechanical assemblies where a removable, reusable pin connection is required. The uncoated steel finish is suited for dry or lightly controlled environments.

This clevis pin is commonly used in light-to-medium duty mechanical linkages found in HVAC damper actuator arms, control rod assemblies, and general industrial fastening applications. It is appropriate for residential and light commercial installations where a 0.375-inch diameter pivot fastener is specified. The 1010-1018 steel material grade offers adequate shear strength for standard clevis bracket applications. Installation typically involves pairing the pin with a matching clevis bracket and securing it with a cotter pin or snap ring through the 0.156-inch hole at the pin tip.

Key Features

• 0.375-inch pin diameter for standard clevis bracket fitment
• 2.219-inch usable length accommodates typical clevis yoke widths
• 0.156-inch retaining hole sized for standard cotter pins or snap rings
• 1010-1018 steel construction provides reliable shear strength in pivot applications
• Uncoated finish — suitable for dry or protected environments
• Removable and reusable design for serviceable linkage assemblies

Compatibility

Designed as a standard-geometry clevis pin for use with 0.375-inch bore clevis brackets and yoke-style linkage assemblies requiring a removable pivot fastener.

Installation Notes

Clevis pins are installed by general maintenance technicians and tradespeople using basic hand tools. Before servicing any linkage assembly, de-energize connected equipment and relieve any mechanical load on the clevis. Insert the pin through aligned clevis and yoke bores, then secure with a cotter pin or snap ring through the retaining hole. Never drive the pin with excessive force — bore alignment should be confirmed before installation to avoid deforming the pin or bracket.