Value Collection P20250 Clevis Pin 1/4 in Steel

Product Description

The VALUE COLLECTION P20250 is a standard clevis pin designed for use in mechanical linkage and fastening applications across a wide range of industrial and trade settings. Machined from 1010-1018 grade steel with an uncoated finish, this pin measures 0.25 inches in diameter with an overall length of 2.5 inches and a usable length of 2.406 inches. A 0.094 inch cotter pin hole is positioned near the retaining end to secure the pin in place during operation. Plumbers, HVAC technicians, and general mechanical contractors use clevis pins in linkage assemblies, rod-end connections, and bracket pivot points where a removable, load-bearing pin is required.

This clevis pin is suited for residential and light commercial mechanical assemblies where a 0.25 inch diameter pivot or linkage fastener is specified. Typical applications include control rod linkages, yoke and clevis assemblies, and hinge or bracket connections in equipment panels and valve assemblies. The uncoated steel construction is appropriate for dry or protected indoor environments where corrosion resistance is not a primary requirement.

Key Features

• 0.25 inch pin diameter for standard clevis and yoke assemblies
• 2.5 inch overall length with 2.406 inches of usable length
• 0.094 inch cotter pin hole for positive retention
• 1010-1018 steel material grade for reliable shear and tensile strength
• Uncoated finish suitable for protected indoor mechanical environments

Compatibility

Designed as a standard-dimension clevis pin for mechanical linkage assemblies requiring a 0.25 inch diameter pin with a 2.5 inch overall length and 0.094 inch cotter hole.

Installation Notes

Installation is typically performed by a mechanical or maintenance technician. Always de-energize and lock out any connected equipment before removing or installing a clevis pin in a linkage assembly. Insert the pin fully through the aligned clevis and rod-end bores, then secure with an appropriately sized cotter pin through the retaining hole. Do not substitute this pin in applications requiring a coated or corrosion-resistant finish without verifying suitability for the environment.