Value Collection P20237 Clevis Pin 3/16 in Steel

Product Description

The VALUE COLLECTION P20237 is a standard clevis pin machined from 1010-1018 steel with no surface coating applied. It measures 3/16 inches in pin diameter and 3 inches in overall length (OAL), with a usable length of 2-29/32 inches. A 3/32-inch cross-hole accommodates a cotter pin or hitch pin clip to secure the assembly after installation. This type of clevis pin is a fundamental fastener used in linkage, hinge, and pivot applications across industrial, agricultural, and mechanical systems. Technicians and maintenance professionals install these pins wherever a removable, load-bearing pivot point is needed.

The P20237 clevis pin is suited for use in mechanical linkages, clevis-and-yoke assemblies, rod-end connections, and similar pivot joints found in light industrial equipment, agricultural machinery, and general fabrication work. Its uncoated steel construction is appropriate for dry or mildly controlled environments. Applications include control rod connections, cable linkages, and bracket pivot points where periodic disassembly is expected.

Key Features

• 3/16-inch pin diameter for standard clevis and yoke fittings
• 3-inch overall length with 2-29/32 inches of usable engagement length
• 3/32-inch cross-hole sized for standard cotter pins or hitch pin clips
• 1010-1018 steel construction provides adequate strength for light-duty pivot applications
• Uncoated finish — inspect for corrosion risk before use in wet or outdoor environments

Compatibility

Designed as a standard clevis pin for use in mechanical linkage and pivot assemblies requiring a 3/16-inch pin diameter and approximately 3-inch overall length.

Installation Notes

Installation is performed by maintenance technicians and mechanical assemblers using basic hand tools. De-energize and relieve any tension or load on the linkage assembly before removing or inserting a clevis pin. Secure the pin after insertion with an appropriately sized cotter pin or hitch pin clip through the 3/32-inch cross-hole to prevent backing out during operation. Follow applicable machinery safety standards and equipment manufacturer guidelines for fastener replacement.