Value Collection P20184 Clevis Pin 3/4 in Stainless Steel

Product Description

The VALUE COLLECTION P20184 is a standard clevis pin machined from 18-8 stainless steel and left uncoated for a clean, corrosion-resistant finish. The pin measures 0.75 inches in diameter with an overall length of 4 inches and a maximum usable length of 3.844 inches. A 0.156-inch cotter pin hole is drilled through the shank to accept a standard retaining pin or cotter pin, securing the clevis connection under load. This type of fastener is used across mechanical, plumbing, HVAC linkage, and industrial assembly applications wherever a removable pivot or hinge connection is required.

Standard clevis pins in this size range are commonly installed in valve linkage assemblies, actuator arms, control rod connections, and bracket pivots in both residential and light commercial mechanical systems. The 18-8 stainless steel construction makes this pin suitable for installations exposed to moisture or mild corrosive environments. Machinists, millwrights, pipefitters, and HVAC controls technicians working on actuator or damper linkage are the typical installers of this fastener type.

Key Features

• 0.75-inch pin diameter for high-load clevis connections
• 4-inch overall length with 3.844 inches of usable shank
• 18-8 stainless steel construction provides corrosion resistance without a coating
• 0.156-inch cotter pin hole for positive retention with a standard cotter pin or snap ring
• Uncoated finish — no plating to flake or contaminate the assembly

Compatibility

Designed as a standard-dimension clevis pin suitable for use in clevis-and-fork linkage assemblies, actuator arms, and pivot connections that require a 0.75-inch pin diameter and a 4-inch overall length.

Installation Notes

Install using standard hand tools; ensure the mating clevis bore is clean and sized to accept a 0.75-inch pin without binding. Always secure the pin with an appropriate cotter pin or retaining clip through the 0.156-inch cross hole before returning the assembly to service. Relieve all tension or load from the linkage before driving or removing the pin. Inspect the mating clevis and fork for wear or deformation at each service interval.