Value Collection NG06070 Pipe Nipple 1 in 7 in Sch 40

Product Description

The VALUE COLLECTION NG06070 is a galvanized steel pipe nipple designed for use in threaded piping systems across plumbing, HVAC, and industrial fluid-handling applications. Measuring 1 inch in pipe size and 7 inches in length, this Schedule 40 nipple is threaded on both ends per ANSI/ASME B1.20.1 standards, ensuring reliable sealed connections with standard fittings and valves. The hot-dip galvanized finish provides corrosion resistance for installations in wet or moderately corrosive environments. At 0.9 pounds, it is a standard close-coupled connector used by plumbers, pipefitters, and mechanical contractors.

This nipple is suited for residential and light commercial plumbing rough-in, boiler piping, gas distribution lines, and HVAC hydronic systems where a short threaded extension or transition is needed between fittings, valves, or equipment connections. The Schedule 40 wall thickness meets standard pressure ratings for typical service-water and low-pressure gas piping. Compliance with ASTM A53, ASTM A106, ASTM A733, and multiple international standards including BS 1387, BS EN 10241, DIN 2440, DIN 2982, DIN 2999, and ISO 7/1 makes it suitable for both domestic and international project specifications.

Key Features

• Schedule 40 wall thickness for standard-duty pressure service
• Threaded on both ends per ANSI/ASME B1.20.1 for leak-free makeup
• Galvanized steel construction resists corrosion in wet service environments
• Meets ASTM A53, ASTM A106, and ASTM A733 material standards
• Compatible with international standards including DIN 2440, BS 1387, and ISO 7/1

Compatibility

Designed as a standard Schedule 40 threaded pipe nipple for use with 1-inch NPT fittings, valves, and equipment connections in residential and commercial piping systems.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable local codes, the International Plumbing Code, or the International Fuel Gas Code where relevant. Apply an approved thread sealant compound or PTFE tape to the male threads before makeup. Hand-tighten first, then use a pipe wrench to achieve proper thread engagement without over-torquing. Shut off and depressurize the system fully before replacing or installing any nipple in an existing line.