Value Collection NFC6725 Steel Sleeve Drywall Anchor

Product Description

The VALUE COLLECTION NFC6725 is a steel sleeve-style hollow wall anchor designed for fastening into drywall where a stud is not available. The anchor body is 0.125 inches in diameter and 1.625 inches in overall length. It accepts a 5/16-inch screw and features a zinc-plated finish for corrosion resistance. When the screw is driven, the sleeve expands behind the wallboard, distributing load against the back face of the panel. Electricians, plumbers, HVAC technicians, and general contractors use these anchors when hanging brackets, conduit supports, pipe hangers, and similar hardware from hollow gypsum board partitions.

This anchor is rated for use in drywall panels ranging from 0.625 inches to 3.5 inches thick, making it suitable for standard single-layer and double-layer gypsum board assemblies found in both residential and light commercial construction. The sleeve design provides a secure mechanical hold without requiring access to the back side of the wall. A minimum order quantity of 100 units applies, and the product ships as a single-unit package quantity.

Key Features

• Steel construction with zinc-plated finish for corrosion resistance
• Sleeve-style expansion design distributes load against back face of wallboard
• Accepts a 5/16-inch screw
• Compatible with drywall panels 0.625 inches to 3.5 inches thick
• 0.125 inches anchor diameter and 1.625 inches overall length for standard gypsum board applications

Compatibility

Designed for use in drywall and hollow gypsum board wall assemblies ranging from 0.625 inches to 3.5 inches in thickness.

Installation Notes

Installation is typically performed by general tradespeople using a drill and screwdriver or screw gun. Drill a pilot hole sized to match the anchor diameter before inserting the sleeve. Drive the screw to expand the sleeve fully against the back of the wallboard — do not overtighten, as excessive torque can pull the anchor through the panel face. Follow all applicable building code requirements for load ratings when using hollow wall anchors in structural or safety-critical applications.