Value Collection MPPIB-100075-050B Machine Screw 10-24

Product Description

The VALUE COLLECTION MPPIB-100075-050B is a 10-24 x 3/4-inch pan head machine screw with a Phillips drive, manufactured in brass. This fastener follows the ASME B18.6.3 standard for inch-series machine screws, ensuring consistent thread form, head geometry, and dimensional tolerances. The pan head profile provides a low, flat-topped dome that sits flush against most work surfaces without the need for a countersink. Length is measured under the head, confirming the 3/4-inch dimension reflects usable thread engagement. These screws are sold in a minimum order quantity of 50 pieces and are suited for general assembly applications where corrosion resistance and moderate strength are required.

This fastener is appropriate for light to medium-duty mechanical and electrical assembly work in residential and commercial settings. Brass construction makes it a practical choice for applications where corrosion resistance is important, including electrical enclosures, HVAC equipment panels, plumbing fixture trim, and instrumentation housings. The Phillips drive is compatible with standard power and hand tools common in trade work. No washer is included or required by design, as the pan head bearing surface contacts the workpiece directly.

Key Features

• 10-24 unified coarse thread for broad tap and nut compatibility
• Pan head with Phillips drive accepts standard Phillips bits and screwdrivers
• Brass material provides corrosion resistance without galling on brass or bronze mating hardware
• Conforms to ASME B18.6.3 inch-series machine screw standard
• Length measured under head — 3/4 inches of thread engagement
• No washer required — pan head bearing surface contacts work directly

Compatibility

Designed as a standard 10-24 inch-series machine screw suitable for use with any 10-24 tapped hole or hex nut conforming to ASME B18.6.3 specifications.

Installation Notes

Install using a Phillips screwdriver or Phillips bit with a power driver set to a controlled torque setting to avoid stripping the brass head. Do not use an impact driver, as brass fasteners are susceptible to overtorque damage. Ensure the mating tapped hole or nut is clean and free of debris before driving. Follow applicable assembly codes and manufacturer torque guidelines for the equipment being serviced.