Value Collection MDB90 32-5 Black 90 Elbow 1-1/4 in

Product Description

The VALUE COLLECTION MDB90 32-5 is a 1-1/4 inch malleable iron 90 degree elbow with threaded end connections and a black finish. Rated at Class 150 with a 300 psi liquid and gas pressure rating, this fitting is built for Schedule 40 piping systems in both plumbing and gas distribution applications. The malleable iron construction provides reliable strength and ductility for installations where vibration or mechanical stress is a factor. It carries a full set of certifications including NSF/ANSI 61 and NSF/ANSI 372 for potable water contact, FM Approval for fire protection use, and cULus listing for safety compliance.

This fitting is suited for residential and commercial plumbing, gas piping, and fire suppression systems where a 90 degree direction change is required in a 1-1/4 inch threaded line. The threaded connection style follows NPT standards, making it compatible with standard Schedule 40 pipe and fittings in black iron piping systems. It is commonly installed by licensed plumbers and pipefitters in gas supply lines, water distribution, and fire protection headers.

Key Features

• 1-1/4 inch threaded 90 degree elbow for Schedule 40 piping
• Malleable iron construction with black finish for corrosion resistance in standard service conditions
• 300 psi liquid and gas pressure rating at Class 150
• NSF/ANSI 61 and NSF/ANSI 372 certified for potable water applications
• FM Approved for fire protection system use
• cULus Listed and UIS Certified for safety compliance
• Meets ABNT, EN 10242, GB/T 3287, GB/T 7306.2, and ISO 7/1 standards

Compatibility

Designed as an OEM-style replacement or new-installation fitting for standard Schedule 40 black iron threaded piping systems in plumbing, gas, and fire protection applications.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable local codes, the International Plumbing Code, and the International Fuel Gas Code where gas service is involved. Shut off and isolate the supply line and depressurize the system fully before beginning work. Apply an appropriate thread sealant or PTFE tape to the male threads prior to assembly and tighten to a proper engagement depth without over-torquing the fitting. Inspect all joints for leaks after pressurizing the system.