Value Collection MDB121 32-2 300 45 Degree Street Elbow

Product Description

The VALUE COLLECTION MDB121 32-2 300 is a 45-degree street elbow fitting designed for black iron pipe systems operating at up to 300 psi. Constructed from malleable iron with a black finish, this fitting accepts threaded connections conforming to ANSI/ASME B1.20.1 and is manufactured to ASME B16.3 standards. At 1-1/4 inches in size, it is suited for directional changes in gas distribution, compressed air, and industrial piping systems. Licensed plumbers and pipefitters install this type of fitting in both new construction and retrofit applications where a 45-degree change of direction is required on a threaded iron pipe run.

This street elbow is commonly used in residential and light commercial gas piping, compressed air distribution, and similar threaded black iron pipe systems. The street configuration means one end is a male thread and the other is a female thread, allowing direct connection without a separate nipple. It is appropriate for dry, non-corrosive service conditions typical of interior gas and air lines. Sold in packages of two, making it practical for jobs requiring multiple fittings.

Key Features

• Malleable iron construction rated for Class 300 service at 300 psi
• 45-degree street elbow geometry for direction changes without an additional nipple
• Threaded ends conform to ANSI/ASME B1.20.1 thread standard
• Manufactured to ASME B16.3 malleable iron pipe fittings standard
• Black finish suitable for gas and compressed air piping
• 1-1/4 inch fitting size for standard iron pipe installations

Compatibility

Designed as a standard threaded replacement or new-installation fitting for 1-1/4 inch black malleable iron pipe systems conforming to ASME B16.3 and ANSI/ASME B1.20.1 thread specifications.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable codes such as the International Fuel Gas Code (IFGC) or International Plumbing Code (IPC). Shut off and depressurize the pipe system completely before disassembling any threaded connections. Apply an approved thread sealant or PTFE tape rated for the service medium before assembly. Tighten threaded fittings with appropriate pipe wrenches to achieve a leak-free joint without over-stressing the fitting.