Value Collection MDB120 50-2 300 Malleable Iron 45 Elbow

Product Description

The VALUE COLLECTION MDB120 50-2 300 is a 2-inch Class 300 malleable iron black pipe 45-degree elbow designed for threaded pipe assembly in industrial and commercial piping systems. Rated at 300 psi, this fitting redirects flow at a 45-degree angle and connects via standard threaded end connections. The black malleable iron construction provides the strength and ductility needed for gas, steam, and fluid distribution lines. Licensed plumbers and pipefitters install this fitting in new construction and retrofit applications where a moderate-angle direction change is required in a threaded black iron system.

This elbow is suited for use in commercial and industrial piping runs where threaded black iron fittings are specified, including natural gas distribution, steam lines, and water systems operating within Class 300 pressure ratings. The 2-inch fitting size accommodates standard Schedule 40 and Schedule 80 black iron pipe. It is appropriate for both above-ground and in-wall applications where local codes permit threaded malleable iron construction. Package quantity is 2 units per order.

Key Features

• 45-degree elbow geometry for moderate flow direction changes in threaded piping runs
• Class 300 pressure rating at 300 psi for demanding system requirements
• Malleable iron construction provides strength and resistance to impact and vibration
• Black finish suitable for gas, steam, and fluid service in non-corrosive environments
• Threaded end connections for tool-only installation without welding or soldering
• Meets EN 10242, ISO 7/1, and applicable enterprise standards

Compatibility

Designed as an OEM-style replacement or new-installation fitting for 2-inch threaded black iron pipe systems rated to Class 300 service conditions.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable local codes, the International Plumbing Code (IPC), and International Fuel Gas Code (IFGC) where gas service is involved. Shut off and depressurize the pipe system fully before removing or installing any threaded fittings. Apply an approved thread sealant or PTFE tape to all male threads before assembly, and tighten using pipe wrenches to achieve proper engagement without over-stressing the fitting. Do not use this fitting in applications that exceed its rated pressure or temperature limits.