Value Collection LSNYD2-4 Locking Fork Terminal

Product Description

The VALUE COLLECTION LSNYD2-4 is a partially insulated locking fork terminal designed for secure, vibration-resistant electrical connections in panel wiring, control circuits, and terminal block applications. The crimp-style connection accepts 1.5 to 2.5 square millimeter wire and is rated for 600 volts. The blue nylon insulation sleeve provides partial coverage over the barrel, making it straightforward to inspect the crimp without removing the terminal. The locking tab on the fork prevents the terminal from backing off a stud under load or vibration, a critical feature in industrial and HVAC control panel environments. Electricians and panel builders install this terminal using a standard ratcheting crimp tool matched to the barrel size.

This terminal is suited for residential and light commercial electrical work, HVAC low-voltage control wiring, motor control panels, and equipment requiring a reliable spade-style mechanical connection. The No. 8 stud size makes it compatible with common screw terminals found on contactors, terminal blocks, motor starters, and bus bar connections. The 0.28 inch fork width and 0.87 inch overall length fit standard panel wiring layouts without excessive bulk. The copper contact material ensures low-resistance conductivity across the connection point.

Key Features

• Locking fork design prevents terminal from backing off the stud under vibration
• Crimp connection rated for 1.5 to 2.5 square millimeter wire range
• 600-volt rating suitable for branch circuit and control wiring applications
• Blue nylon partial insulation allows visual crimp inspection after installation
• Copper contact material provides reliable low-resistance conductivity
• UL Listed and cUL Listed; RoHS Compliant

Compatibility

Designed as a standard crimp locking fork terminal for use with No. 8 studs and wire in the 1.5 to 2.5 square millimeter range, typical in residential and light commercial electrical and HVAC control panel wiring applications.

Installation Notes

Installation should be performed by a qualified electrician in accordance with the National Electrical Code (NEC) and any applicable local codes. De-energize and lock out the circuit before terminating or removing any wiring. Use a calibrated ratcheting crimp tool sized for the terminal barrel to achieve a gas-tight crimp. Do not solder over the crimp, as this can create a stress point and compromise the connection.