Value Collection KP9827 Concrete Wedge Anchor 1/2 in 10pk

Product Description

The VALUE COLLECTION KP9827 is a stainless steel concrete wedge anchor designed for secure fastening into hardened concrete. At 1/2 inch in diameter and 4-1/2 inches overall length, this anchor provides a minimum embedment depth of 2-1/4 inches and a thread length of 3-1/8 inches. Constructed from 304 stainless steel, it offers strong corrosion resistance in demanding environments. The hex head drive type allows for straightforward installation with standard tooling. This anchor is sold in a package of 10 units, making it practical for multi-point fastening tasks on a single job.

Concrete wedge anchors of this type are used in a wide range of trade applications, including securing equipment bases, mounting structural brackets, anchoring conduit supports, attaching equipment pads, and fastening mechanical components directly to concrete slabs, walls, and foundations. The 1/2 inch diameter and 4-1/2 inch length make this anchor well suited for medium-duty structural connections in both residential and light commercial settings. HVAC, plumbing, and electrical contractors commonly use wedge anchors when installing equipment supports and overhead hangers in concrete structures.

Key Features

• 304 stainless steel construction for corrosion resistance in wet or chemically exposed environments
• 1/2 inch diameter with 4-1/2 inches overall length for medium-duty concrete fastening
• Minimum embedment depth of 2-1/4 inches for reliable holding strength in hardened concrete
• 3-1/8 inch thread length provides ample engagement for nuts and washers
• Hex head drive type compatible with standard wrenches and impact drivers
• Package quantity of 10 units per order for efficient multi-anchor installations

Compatibility

Designed as a standard 1/2 inch diameter concrete wedge anchor for use in fully cured, hardened concrete substrates in structural and mechanical fastening applications.

Installation Notes

Concrete wedge anchors are installed by licensed contractors and qualified tradespeople using a hammer drill and carbide-tipped bit matched to the anchor diameter. Drill the hole to the required depth, clear debris, drive the anchor, and tighten the nut to expand the wedge against the concrete. Always verify minimum slab thickness and embedment requirements before installation, and follow applicable building codes including IBC and ACI 318 standards for anchor design. Never install in cracked, uncured, or structurally compromised concrete.