Value Collection KP9826 Concrete Wedge Anchor 1/2 in Ss Hex

Product Description

The VALUE COLLECTION KP9826 is a stainless steel concrete wedge anchor designed for permanent fastening into solid concrete. It features a 1/2-inch diameter body with a hex drive head, making it compatible with standard socket and wrench tooling. The anchor is constructed from 304 stainless steel for corrosion resistance in demanding environments. With a 3-3/4-inch overall length and a 2-3/8-inch thread length, it provides a secure mechanical bite once expanded against the base material. This anchor is installed by licensed contractors, structural trades, and experienced tradespeople working on concrete attachment applications.

This anchor is suited for use in residential and commercial concrete fastening applications where a reliable, corrosion-resistant connection is required. Typical installations include attaching equipment bases, brackets, HVAC curbs, electrical panels, conduit supports, pump bases, and structural hardware directly to concrete slabs or walls. A minimum embedment depth of 2-1/4 inches must be achieved to develop full holding strength. Sold in a package of 10 anchors.

Key Features

• 304 stainless steel construction provides corrosion resistance for interior and exterior concrete applications
• 1/2-inch diameter body for high load capacity in solid concrete
• Hex head drive type compatible with standard sockets and open-end wrenches
• 2-3/8-inch thread length ensures full nut engagement after embedment
• Minimum embedment of 2-1/4 inches ensures proper expansion and pullout resistance
• Package of 10 anchors per unit for project efficiency

Compatibility

Designed as a standard wedge anchor for use in solid concrete base material. Consult applicable building codes and anchor load tables to confirm suitability for the specific load and concrete strength of the installation.

Installation Notes

Wedge anchors are installed by drilling a hole into cured concrete using a hammer drill and carbide-tipped bit sized to match the anchor diameter. The hole must meet or exceed the minimum embedment depth before setting the anchor. Always clear debris from the hole before insertion and torque the nut to specification per the manufacturer load table using a calibrated torque wrench. Do not install in cracked, green, or deteriorated concrete, and follow applicable building and safety codes for the jurisdiction.