Value Collection KP82103-1 Blind Rivet Size 66 Ss 100 Pack

Product Description

The VALUE COLLECTION KP82103-1 is a Size 66 open end blind rivet with a large flange dome head, stainless steel body, and stainless steel mandrel. It is designed for applications where a wide-bearing flange is needed to distribute clamp load across thin or soft substrate materials. The body diameter is 3/16 inches and the head diameter is 0.615 inches. Grip range runs from 0.251 to 0.375 inches, making it suitable for a range of material stack thicknesses. Tensile strength is rated at 1,300 pounds and shear strength at 1,150 pounds. Sold in a package quantity of 100 rivets per order.

This rivet is used in light fabrication, HVAC ductwork assembly, enclosure manufacturing, and general sheet metal work where corrosion resistance is required. The stainless steel body and mandrel make it appropriate for outdoor, marine-adjacent, or chemically exposed environments. The large flange dome head is especially well-suited for joining thin-gauge sheet metal, fiberglass, or plastic panels where pull-through resistance is a priority. Installation requires a standard blind rivet pulling tool sized for 3/16-inch body rivets. This package ships as a quantity of 100 units.

Key Features

• Open end design allows standard mandrel pull installation with no access needed from the blind side
• Large flange dome head at 0.615 inches diameter increases bearing surface and reduces pull-through risk on thin materials
• Stainless steel body and mandrel provide corrosion resistance in wet or chemically active environments
• Grip range of 0.251 to 0.375 inches accommodates variable material stack thicknesses
• Tensile strength of 1,300 pounds and shear strength of 1,150 pounds for reliable structural performance
• Meets IFI 114 Grade 51 fastener standard

Compatibility

Designed for use in applications requiring a 3/16-inch body diameter blind rivet with a grip range of 0.251 to 0.375 inches. Recommended drill or hole size is a Number 11 wire gauge drill, corresponding to a hole diameter of 0.192 to 0.196 inches.

Installation Notes

Installation is performed with a standard hand or pneumatic blind rivet pulling tool rated for 3/16-inch rivets. Verify hole diameter falls within the 0.192 to 0.196 inch range before installation to ensure proper mandrel pull and flange set. Always wear appropriate eye protection, as mandrel stems eject at force during setting. No special certifications are required for installation, though sheet metal work on HVAC equipment should follow applicable local mechanical codes.