Value Collection KP76597 Cut-off Wheel 12 in Aluminum Oxide

Product Description

The VALUE COLLECTION KP76597 is a Type 1 (01/41) flat cut-off wheel designed for aggressive cutting on steel. Built with reinforced aluminum oxide abrasive at 24 grit and bonded with a resinoid bond, this wheel delivers fast, consistent material removal. It measures 12 inches in diameter with a 1/8-inch thickness and accepts a 20 mm arbor hole. Maximum operating speed is rated at 6360 RPM. The hardness code is R, indicating a firm wheel suited to steel cutting applications. This wheel is intended for use on stationary or portable angle grinders and cut-off machines operated by metalworkers, fabricators, and maintenance trades.

This cut-off wheel is suited for straight cutting operations on steel stock, pipe, structural shapes, and ferrous metal workpieces. Its Type 1 flat profile is appropriate for chop saws and right-angle grinders configured for cut-off duty. The 24-grit aluminum oxide construction provides aggressive stock removal where a clean, fine finish is not required. It is a standard choice in fabrication shops, job sites, and maintenance facilities where ferrous material cutting is a routine task.

Key Features

• Type 1 (01/41) flat wheel profile for straight cut-off operations
• Aluminum oxide abrasive, reinforced construction for durability under load
• 24 grit for aggressive cutting on steel
• Resinoid bond provides shock resistance during cutting
• 6360 RPM maximum operating speed
• Hardness code R for firm wheel performance on ferrous materials

Compatibility

Designed for use on steel applications with cut-off machines and angle grinders that accept a 12-inch diameter, 1/8-inch thick Type 1 wheel with a 20 mm arbor hole and operate at or below 6360 RPM.

Installation Notes

Installation and wheel changes should be performed by qualified personnel familiar with abrasive wheel safety. Always power down and disconnect the machine before mounting or removing a wheel. Inspect the wheel for cracks or damage before each use and never exceed the rated maximum RPM marked on the wheel. Follow ANSI B7.1 safety standards and all applicable machine guarding requirements when operating cut-off equipment.