Value Collection KP76530 Cut-off Wheel Type 1 10 in 36 Grit

Product Description

The VALUE COLLECTION KP76530 is a Type 1 (01/41) cut-off wheel designed for aggressive cutting on stainless steel and other hard materials. Built with aluminum oxide abrasive and a resinoid bond, this reinforced wheel measures 10 inches in diameter and 3/32 inch thick with a 5/8-inch arbor hole. It carries a hardness code of R and a 36-grit rating, suited for fast, coarse cuts. Rated at a maximum of 6,112 RPM, it is installed on compatible angle grinders and cut-off machines by metalworkers, fabricators, and maintenance technicians working in industrial and trade environments.

This wheel is intended for use on stainless steel in demanding cutting applications. The Type 1 flat-profile geometry keeps the wheel aligned for straight, consistent cuts. It fits grinders and cut-off tools with a 5/8-inch arbor and is appropriate for bench-mounted or handheld machines capable of operating within the 6,112 RPM maximum rating. Typical use cases include cutting pipe, bar stock, angle iron, and sheet metal in fabrication shops, maintenance facilities, and field service work.

Key Features

• Aluminum oxide abrasive construction provides reliable cutting performance on stainless steel
• Reinforced resinoid bond for added structural integrity during high-speed operation
• 36 grit for fast, aggressive material removal
• Type 1 flat wheel profile supports straight, controlled cuts
• 5/8-inch arbor hole fits standard angle grinders and cut-off machines
• Maximum rated speed of 6,112 RPM for safe operation within equipment limits

Compatibility

Designed for use on angle grinders and cut-off machines with a 5/8-inch arbor that operate at or below 6,112 RPM. Application is rated for stainless steel per manufacturer specifications.

Installation Notes

Always verify that the grinder or cut-off tool RPM rating meets or exceeds the wheel maximum RPM before mounting. Ensure the machine is fully powered down and unplugged before installing or removing the wheel. Inspect the wheel for cracks or damage prior to each use and never operate a damaged wheel. Eye protection, face shield, and appropriate PPE are required during operation in accordance with ANSI B7.1 and applicable workplace safety standards.