Value Collection K06006000751212 Wire Cloth 33 Gauge

Product Description

The VALUE COLLECTION K06006000751212 is a fine-mesh stainless steel wire cloth cut to 12 x 12 inches, manufactured from Type 304 stainless steel wire at 33 gauge (0.0075 inches wire diameter). It is designed for filtration, screening, and separation applications across HVAC, plumbing, and industrial service environments. The mesh delivers a 0.006-inch width opening, making it suitable for fine particle retention and controlled flow applications. HVAC technicians, plumbers, and industrial service professionals use this material for fabricating custom strainer screens, protective guards, and ventilation inserts. The Type 304 alloy provides corrosion resistance in both wet and dry service conditions.

This wire cloth is suited for residential and light commercial applications where a fine stainless mesh is required. Typical uses include fabricating replacement strainer screens for plumbing lines, constructing protective mesh inserts for HVAC equipment openings, and building custom filtration media. The 12 x 12 inch sheet size allows for straightforward field cutting and fitting to standard component housings or custom fabricated frames. No specific model restrictions apply; the sheet format is intended for professional tradespeople who cut and fit mesh to their own dimensional requirements.

Key Features

• Type 304 stainless steel construction for corrosion resistance in wet and dry environments
• 33 wire gauge with 0.0075-inch wire diameter for fine, consistent mesh geometry
• 0.006-inch width opening for fine particle retention and controlled flow
• 12 x 12 inch sheet size suitable for field cutting and custom fabrication
• Single-piece packaging for straightforward handling and storage on the job

Compatibility

Designed as a general-purpose stainless steel wire cloth sheet for use in custom filtration, screening, and ventilation fabrication applications across HVAC, plumbing, and industrial service trades.

Installation Notes

Wire cloth should be cut using aviation snips or metal shears rated for light-gauge stainless steel; standard tin snips may distort the mesh along the cut edge. Wear appropriate cut-resistant gloves when handling and trimming the sheet, as cut edges can be sharp. When used in plumbing or HVAC filtration applications, verify that the mesh opening size meets the minimum flow and particle-retention requirements of the system before installation. Shut off and depressurize any system before replacing or installing mesh components.