Value Collection JY4992103 M6x0.75 Straight Flute Tap

Product Description

The VALUE COLLECTION JY4992103 is a straight flute tap designed for cutting M6x0.75 Metric Fine internal threads in through holes and shallow blind holes. Built from high-speed steel with a bright, uncoated finish, this 4-flute plug tap delivers consistent thread form in ferrous and non-ferrous materials. The plug chamfer provides a gradual lead-in that distributes cutting forces evenly, reducing the risk of thread distortion or tap breakage during the threading operation. With an overall length of 2.5 inches and a 1-inch thread length, the tool suits standard machine tapping setups in production and maintenance environments alike.

This tap is suited for metric fine threading applications in machine shops, maintenance and repair operations, and light manufacturing settings. The M6x0.75 thread size and Metric Fine standard are commonly encountered in precision fastener applications, instrumentation components, and automotive parts where finer thread pitch provides greater tensile strength and vibration resistance than coarse equivalents. It is intended for use with a tapping driver, drill press, or CNC machining center operating at appropriate speeds for the material being tapped.

Key Features

• M6x0.75 Metric Fine thread form for precision fastener and instrumentation applications
• 4 straight flutes provide rigid support and consistent chip evacuation in through-hole tapping
• Plug chamfer with 3-5 thread lead-in distributes cutting load for controlled thread entry
• High-speed steel construction offers good toughness and wear resistance across a range of materials
• Bright, uncoated finish allows direct inspection of tool condition during service
• D3 thread limit designation ensures dimensional compliance for standard M6x0.75 threaded fits

Compatibility

Designed as an OEM-style replacement or direct addition for standard M6x0.75 Metric Fine tapping operations; fits standard tap holders and collet chucks sized for the corresponding shank diameter of this tool class.

Installation Notes

Tapping operations should be performed by a qualified machinist or toolroom technician. Ensure the workpiece is securely fixtured and the tap is properly aligned with the drilled pilot hole before engagement to prevent cross-threading or tap breakage. Apply appropriate cutting fluid for the workpiece material to reduce heat and extend tool life. Confirm spindle speed and feed rate are set per the material specification before starting the cycle.