Value Collection ICP63060J TCMT32.51 Carbide Turning Insert

Product Description

The VALUE COLLECTION ICP63060J is a solid carbide turning insert designed for precision metal cutting on CNC lathes and manual turning centers. It carries the ANSI insert code TCMT32.51 and ISO code TCMT16T304, with an ICP22 manufacturer grade and an aluminum oxide (Al2O3) coating for improved wear resistance and thermal stability. The triangular insert shape provides three usable cutting edges. With a 3/8-inch inscribed circle and a 1/64-inch corner radius, this insert suits fine-to-medium finishing passes where edge integrity and dimensional accuracy matter. Licensed machinists and CNC operators in job shops and production environments install this insert.

This insert is suited for turning operations on non-ferrous metals and cast materials, consistent with primary workpiece material codes K and N. The positive side clearance geometry reduces cutting forces and makes it well-matched to lighter cuts and finishing work. It is secured via a screw-clamp holding method, which is standard on most TCMT-style toolholders. The chip breaker designation T is built into the insert geometry to assist with chip control during continuous turning passes.

Key Features

• ANSI code TCMT32.51, ISO code TCMT16T304 — compatible with standard TCMT-style screw-clamp toolholders
• Al2O3 (aluminum oxide) coating for thermal resistance and extended tool life
• ICP22 grade with C2 material grade rating, suitable for non-ferrous and cast workpiece materials
• Positive clearance geometry reduces cutting forces for finishing operations
• Three usable cutting edges per insert for lower per-edge tooling cost
• Screw-clamp insert holding method for positive, repeatable seating

Compatibility

Designed for use in standard TCMT-style screw-clamp toolholders accepting a TCMT32.51 insert with a 0.173-inch hole diameter. Primary workpiece material codes K and N indicate suitability for cast iron, non-ferrous metals, and non-metallic materials.

Installation Notes

Insert installation and indexing should be performed by a qualified machinist with the machine in a fully stopped and locked-out state. Use the appropriate torx or hex key to seat the clamping screw to the toolholder specification — do not overtighten, as this can crack the carbide body. Inspect the insert pocket and clamping screw for wear or debris before seating a new insert. Follow your facility safety procedures and machine tool manufacturer guidelines when changing inserts.