Value Collection HC3XX14055 Hex Head Cap Screw M14

Product Description

The VALUE COLLECTION HC3XX14055 is a fully threaded hex head cap screw designed for demanding fastening applications where corrosion resistance is critical. Manufactured from Grade 316 austenitic stainless steel (A4), this fastener delivers superior resistance to chlorides, acids, and marine environments compared to standard 304-grade hardware. The screw follows DIN 933 dimensions with an M14 x 2.00 mm thread, a 55 mm length under head, and a 22 mm hex drive size. It is supplied uncoated with a bright finish. Maintenance technicians, millwrights, pipefitters, and marine service professionals typically install this hardware in corrosive or wet service conditions.

This screw is suited for use in marine, chemical processing, food service, pool and aquatic facility, and outdoor structural applications where standard carbon steel fasteners are not acceptable. The fully threaded shank makes it a practical choice for through-bolt applications or short-grip installations where thread engagement along the full length is required. It is a metric fastener and is not interchangeable with SAE or UNC thread patterns.

Key Features

• Grade 316 austenitic stainless steel (A4) for high corrosion resistance in chloride and acidic environments
• Fully threaded shank per DIN 933 standard
• M14 x 2.00 mm metric thread — not compatible with inch-series fasteners
• 22 mm hex drive size accommodates standard metric wrenches and sockets
• Bright uncoated finish — no plating to chip or delaminate
• Single-piece packaging (Qty 1) for low-volume maintenance and repair use

Compatibility

Designed as a metric DIN 933 hex head cap screw for any application requiring an M14 x 2.00 fully threaded fastener in Grade 316 stainless steel. Verify thread pitch and grip length against the specific joint requirement before installation.

Installation Notes

Installation should be performed by a qualified tradesperson familiar with metric fastener torque requirements for the joint material and service conditions. Power down or depressurize any associated equipment before fastener service. Use calibrated metric tooling — a 22 mm wrench or socket — and avoid over-torquing, which can gall stainless threads; applying an appropriate anti-seize compound to the threads before assembly is standard practice for stainless fasteners. Confirm that the mating thread and nut are also Grade A4 stainless or a compatible material to prevent galvanic corrosion.