Value Collection HC1XX12070-010BX M12 Hex Cap Screw 316 Ss

Product Description

The VALUE COLLECTION HC1XX12070-010BX is a metric hex head cap screw designed for fastening applications that require corrosion resistance and dimensional precision. This screw is manufactured from Grade 316 austenitic stainless steel, also classified as Grade A4, and is left with a bright, uncoated finish. It features an M12 x 1.75 mm thread with a 70 mm length under the head and is partially threaded, conforming to DIN 931, EN 24014, and ISO 4014 standards. Plumbers, pipefitters, HVAC installers, and industrial maintenance technicians commonly install this fastener in wet, chemical-exposed, or marine environments where carbon steel fasteners would corrode.

This hex head cap screw is suited for use in residential and commercial mechanical systems, structural assemblies, and equipment mounting applications where metric fasteners are specified. The Grade 316 stainless construction makes it appropriate for use in chloride-rich environments, including coastal installations, pool equipment, and chemical processing systems. The DIN 931 and ISO 4014 partial-thread geometry provides clamping strength while allowing controlled engagement depth in through-bolted assemblies. Installers working with flanged pipe connections, equipment frames, or panel mounting hardware will find this screw a direct fit for metric-specified applications.

Key Features

• Grade 316 austenitic stainless steel (Grade A4) for high corrosion resistance in wet and chemical environments
• M12 x 1.75 mm thread with 70 mm length under head for deep fastening engagement
• Partially threaded shank per DIN 931, EN 24014, and ISO 4014 standards
• 19 mm hex drive for use with standard metric wrenches and sockets
• Bright, uncoated finish — no plating to chip or flake under torque
• Sold in minimum order quantities of 10 units

Compatibility

Designed as a standard metric hex head cap screw for any application specifying an M12 x 1.75 x 70 mm partially threaded fastener to DIN 931, EN 24014, or ISO 4014. Suitable for use wherever Grade 316 stainless or Grade A4 stainless is required.

Installation Notes

Installation should be performed by a qualified tradesperson familiar with metric fastener specifications and applicable torque requirements for the assembly being serviced. Verify thread engagement depth and mating material compatibility before installation, particularly when fastening into aluminum or dissimilar metals where galvanic corrosion may occur despite the stainless construction. Use a calibrated torque wrench to meet any assembly specifications — do not estimate torque by feel on structural or pressure-bearing connections. Follow all applicable mechanical codes for the specific installation type.