Value Collection HC1XX10180 Hex Head Cap Screw M10

Product Description

The VALUE COLLECTION HC1XX10180 is a metric hex head cap screw designed for industrial and mechanical fastening applications. It features an M10 x 1.50 thread profile with a 180 mm length under head and is manufactured from Grade 316 austenitic stainless steel, Metric Grade A4. The bright uncoated finish preserves the natural corrosion resistance of the alloy. This screw is partially threaded and conforms to DIN 931, EN 24014, and ISO 4014 standards. It is installed with a 17 mm hex wrench or socket. Tradespeople and maintenance professionals working in corrosive or marine environments rely on 316 stainless fasteners like this for long-term joint integrity.

This cap screw is suited for use in wet, chloride-rich, or chemically aggressive environments where carbon steel fasteners would corrode prematurely. Typical applications include process piping supports, marine deck hardware, food-service equipment frames, pump and valve assemblies, and outdoor structural connections. The partial threading allows the unthreaded shank to bear shear loads in bolted joints, making it appropriate for structural connections where load transfer through the shank is required.

Key Features

• Grade 316 austenitic stainless steel provides excellent resistance to chloride corrosion and pitting
• Metric Grade A4 material classification per ISO fastener standards
• Partially threaded shank supports shear-load-bearing joint designs
• Conforms to DIN 931, EN 24014, and ISO 4014 dimensional standards
• Bright uncoated finish retains full material corrosion resistance without plating
• 17 mm hex drive compatible with standard metric hex sockets and open-end wrenches

Compatibility

Designed as a standard metric hex head cap screw for use with M10 x 1.50 nuts and tapped holes conforming to ISO metric thread standards.

Installation Notes

Installation is performed by mechanical, maintenance, or millwright tradespeople using a 17 mm socket or open-end wrench. Always clean and inspect mating threads before assembly. Stainless steel fasteners are susceptible to galling during installation; apply an anti-seize compound rated for stainless steel to reduce friction and prevent thread damage. Follow applicable torque specifications from your engineering drawings or fastener reference, as none are specified by the manufacturer for this part.