Value Collection G130R 50X32 Malleable Iron Pipe Reducer

Product Description

The VALUE COLLECTION G130R 50X32 is a malleable iron tee reducer fitting designed for threaded pipe assemblies in plumbing, mechanical, and light industrial piping systems. This Class 150 fitting measures 2 x 2 x 1-1/4 inches and carries a galvanized finish to resist corrosion in wet or exposed environments. It is rated for 300 psi on liquid and gas service and 150 psi on steam service, making it a reliable transition fitting wherever a run-and-branch reduction is needed. Licensed plumbers and pipefitters are the typical installers, using standard pipe wrenches and NPT-threaded fittings throughout the assembly.

This reducer is suited for residential and light commercial piping installations including domestic water supply, compressed air lines, natural gas distribution, and low-pressure steam systems. The galvanized malleable iron construction handles both above-ground and exposed indoor installations. It functions as a branch reduction at a tee connection, stepping down from a 2-inch run to a 1-1/4-inch branch outlet while maintaining a 2-inch straight-through run.

Key Features

• Malleable iron construction provides strength and impact resistance in threaded systems
• Galvanized finish offers corrosion protection in wet and exposed environments
• Rated 300 psi for liquid and gas service
• Rated 150 psi for steam service
• Class 150 fitting meets standard pressure-temperature requirements for NPT threaded pipe systems
• 2 x 2 x 1-1/4 inch sizing allows inline run-and-branch reduction in a single fitting

Compatibility

Designed as a standard NPT-threaded Class 150 malleable iron reducer fitting for use in threaded pipe systems carrying liquids, gases, or low-pressure steam.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter following applicable IPC or IFGC code requirements for the service type. Shut off and depressurize the line completely before making or breaking any threaded connections. Apply an appropriate thread sealant or PTFE tape rated for the intended service medium. Do not exceed the rated pressure for the service type, and inspect threads for damage before assembly.