Value Collection G130R 32X15 Galvanized Reducing Tee

Product Description

The VALUE COLLECTION G130R 32X15 is a Class 150 galvanized malleable iron reducing tee designed for threaded pipe assemblies in gas and liquid distribution systems. The fitting connects a 1-1/4 inch run on both ends to a 1/2 inch branch outlet, making it a practical solution for reducing branch lines off a main pipe. Rated at 300 psi for liquid and gas service and 150 psi for steam, this tee handles the pressure demands common in commercial and residential piping installations. Malleable iron construction provides the toughness required for threaded connections, while the galvanized finish adds corrosion resistance for wet or outdoor environments.

This reducing tee is suited for use in natural gas distribution lines, compressed air systems, water supply piping, and steam systems operating within its rated pressure limits. Plumbers, pipefitters, and mechanical contractors install this fitting wherever a branch takeoff at a reduced diameter is needed along a 1-1/4 inch main. It is appropriate for both new construction and retrofit work in residential, light commercial, and industrial piping applications.

Key Features

• Class 150 malleable iron construction for reliable threaded assembly
• Galvanized finish provides corrosion resistance in wet and outdoor environments
• 300 psi rated for liquid and gas service
• 150 psi rated for steam service
• Reducing configuration: 1-1/4 x 1-1/4 x 1/2 inches for branch line reduction
• Threaded ends for standard NPT pipe connections

Compatibility

Designed as an OEM-style replacement or new-installation fitting for standard NPT threaded pipe systems in Class 150 malleable iron piping assemblies.

Installation Notes

Installation of this fitting should be performed by a licensed plumber or pipefitter in accordance with applicable local codes, including the International Plumbing Code and International Fuel Gas Code where relevant. Shut off and depressurize the pipe system completely before disassembling any existing connections. Apply an appropriate thread sealant or PTFE tape to all male threads before assembly, and tighten connections to a firm, leak-free fit without over-torquing the malleable iron threads. Pressure-test the completed assembly before returning the system to service.