Value Collection G-TEE20 Malleable Iron Pipe Tee 2 in

Product Description

The VALUE COLLECTION G-TEE20 is a 2-inch malleable iron pipe tee designed for use in fluid, gas, and steam distribution systems. Built to a Class 150 rating and finished with a galvanized coating for corrosion resistance, this fitting handles liquid and gas service up to 300 psi and steam service up to 150 psi. The tee configuration allows a branch takeoff from a main pipe run and is a standard component in mechanical piping assemblies. Plumbers, pipefitters, and mechanical contractors install this type of fitting in commercial and industrial piping systems.

This fitting is appropriate for residential and light commercial plumbing, HVAC hydronic systems, gas distribution piping, and steam heating applications where a 2-inch threaded branch connection is required. The galvanized finish extends service life in wet or mildly corrosive environments. Threaded ends accept standard NPT pipe, making it compatible with common black iron and galvanized pipe in existing systems.

Key Features

• Liquid and gas pressure rating of 300 psi for high-demand service
• Steam pressure rating of 150 psi suitable for low-pressure steam systems
• Malleable iron construction provides strength and impact resistance
• Galvanized finish coating for corrosion protection in wet environments
• Class 150 fitting rating per standard pipe fitting classification
• 2-inch fitting size with standard NPT threaded connections

Compatibility

Designed as an OEM-style replacement or new-installation fitting for 2-inch threaded malleable iron piping systems in plumbing, gas, and steam heating applications.

Installation Notes

Installation of threaded pipe fittings should be performed by a licensed plumber or pipefitter in accordance with applicable codes such as the IPC or IFGC. Shut off all supply pressure and depressurize the line before removing or installing any fitting. Apply an appropriate thread sealant or PTFE tape rated for the service type — gas, steam, or liquid — before making up the joint. Do not overtighten threaded joints; hand-tight plus wrench turns per standard practice is sufficient to achieve a leak-free seal.