Value Collection E1419014 Solid Pilot Counterbore 24mm Hss

Product Description

The VALUE COLLECTION E1419014 is a solid pilot counterbore designed for precision spot-facing and counterboring operations in metal fabrication and machining applications. Built from high speed steel, this tool accepts fasteners up to 14 mm and cuts a 24 mm diameter counterbore with a 15 mm pilot to maintain accurate hole alignment. The Morse taper shank mounts directly into compatible drill presses, milling machines, and machining centers. With 3 flutes and a forward cutting direction, it delivers clean, burr-free seating surfaces for fastener heads. Overall length is 8.25 inches, giving operators adequate reach in most standard setups.

This counterbore is suited for use in general metalworking, toolroom work, and production machining environments where consistent counterbore depth and concentricity are required. It is typically used to prepare holes for socket head cap screws, hex bolts, and similar fasteners requiring a recessed seat. The 2MT shank makes it compatible with machines equipped with a No. 2 Morse taper spindle or adapter sleeve. Machinists, tool and die makers, and maintenance technicians will find this tool appropriate for both one-off jobs and repeat production work.

Key Features

• 24 mm counterbore diameter sized for 14 mm fastener compatibility
• 15 mm solid pilot maintains bore concentricity during cutting
• 3-flute geometry for smooth, consistent surface finish
• High speed steel construction provides durability across a range of workpiece materials
• No. 2 Morse taper shank for direct spindle mounting without additional toolholders
• 8.25 inches overall length suits standard drill press and mill setups

Compatibility

Designed for use in machines equipped with a No. 2 Morse taper spindle. Suitable for counterboring operations requiring a 24 mm seat diameter and 15 mm pilot on materials compatible with high speed steel tooling.

Installation Notes

Installation is performed by licensed machinists or qualified toolroom personnel. Secure the Morse taper shank fully into the spindle before operation, and ensure the machine is fully powered down and locked out before changing tooling. Use a proper drift and knockout bar to remove the taper shank — do not use the spindle drawbar alone if not designed for it. Follow applicable machine tool safety guidelines and shop SOPs for spindle speed selection based on workpiece material and counterbore diameter.