Value Collection CD555898 Concrete Wedge Anchor 5/8 in 10pk

Product Description

The VALUE COLLECTION CD555898 is a zinc-plated steel concrete wedge anchor designed for secure fastening into concrete and masonry substrates. At 5/8 inch in diameter and 7 inches in overall length, this anchor features a 5 inch threaded section that accepts a standard nut and washer for a flush, load-bearing connection. The hex head drive type allows installation with standard hex tools. Made from 1018 steel with a zinc-plated finish for corrosion resistance, this anchor is a staple for structural and mechanical fastening applications in construction and industrial maintenance work. Each package contains 10 anchors.

Concrete wedge anchors of this size are commonly used in commercial and residential construction for attaching structural steel, equipment bases, hangers, brackets, and conduit supports directly to poured concrete floors, walls, and columns. The 5/8 inch diameter suits medium to heavy load applications where pull-out and shear resistance are critical. Licensed contractors, ironworkers, electricians securing large conduit systems, and mechanical contractors installing equipment pads will find this size appropriate for a wide range of anchoring tasks governed by IBC and applicable structural codes.

Key Features

• 5/8 inch diameter with 7 inch overall length for deep embedment in concrete
• 5 inch thread length accommodates nut and washer hardware for secure clamping
• 1018 steel construction provides reliable tensile and shear strength
• Zinc-plated finish offers baseline corrosion protection for interior and dry applications
• Hex head drive type compatible with standard sockets and wrenches
• Sold in a package of 10 anchors

Compatibility

Designed for use with standard nut and washer hardware in poured concrete and masonry applications. No specific OEM system compatibility is stated by the manufacturer for this anchor.

Installation Notes

Installation requires a hammer drill and a carbide-tipped bit sized to match the anchor diameter. The concrete must be fully cured before installation, and the hole must be drilled to the required embedment depth, then cleared of dust and debris before driving the anchor. Torque the nut to the fastener manufacturer's published specification for the diameter and embedment depth. Follow applicable building codes and structural engineer requirements for minimum edge distance, spacing, and embedment depth.