Value Collection CD552564 Standard Clevis Pin 7/16 in

Product Description

The VALUE COLLECTION CD552564 is a standard clevis pin designed for use in mechanical linkage assemblies, cotter pin retention systems, and general fastening applications across industrial and trade settings. The pin measures 7/16 inch in diameter with an overall length of 1 inch and a usable length of 27/32 inch. A 7/64 inch cross hole is drilled near the tip to accept a cotter pin or hitch pin clip, securing the assembly once installed. The pin is fabricated from steel with a zinc-plated finish for basic corrosion resistance. Mechanical technicians, millwrights, and maintenance trades install this hardware during equipment assembly, linkage adjustment, or component replacement.

This clevis pin is suited for light-duty mechanical linkages, pivot points, and clevise connections in a wide range of equipment. Typical applications include HVAC damper linkages, actuator rod ends, chain linkages, and general industrial machinery where a removable, retained pin connection is required. The zinc-plated finish makes it appropriate for dry or mildly humid environments. This SKU is sold in a package quantity of 25, making it practical for service vans or shop stock replenishment.

Key Features

• 7/16 inch pin diameter for standard clevis and linkage applications
• 1 inch overall length with 27/32 inch usable length
• 7/64 inch cotter hole near tip for secure retention with a cotter pin or clip
• Steel construction with zinc-plated finish for basic corrosion resistance
• Package quantity of 25 for shop or truck stock

Compatibility

Designed as a standard-dimension clevis pin for general mechanical linkage assemblies requiring a 7/16 inch pin diameter and 1 inch overall length with cotter pin retention.

Installation Notes

Install by inserting the pin through aligned clevis and rod end bores, then securing with an appropriately sized cotter pin or hitch clip through the 7/64 inch cross hole. Always de-energize or de-pressurize the connected system before removing or replacing a clevis pin in a loaded linkage. Inspect bore alignment before insertion to avoid forcing the pin, which can deform the hole or pin shank. Removal typically requires needle-nose pliers or a pin punch and hammer.