Value Collection CA7029U61 Cut-off Wheel 7in Aluminum Oxide

Product Description

The VALUE COLLECTION CA7029U61 is a Type 1 resinoid-bonded aluminum oxide cut-off wheel designed for straight cutting on stationary grinding and cutting equipment. The wheel measures 7 inches in diameter and 1/32 inches thick, with a 1-1/4 inches arbor hole. It carries a 60-grit rating and a hardness code of T, making it well-suited for aggressive cutting on steel workpieces. Rated to a maximum of 8500 RPM, this reinforced wheel is built to handle sustained cutting loads without compromising operator safety or cut quality. It weighs 0.12 pounds.

This cut-off wheel is intended for use with stationary cutting tools such as chop saws and stationary abrasive cutters in shop or fabrication environments. Its aluminum oxide abrasive and resinoid bond are a standard pairing for cutting mild steel, structural steel, and similar ferrous materials. Fabricators, metalworkers, and maintenance technicians will find this wheel appropriate for high-volume straight cuts where consistent performance is required.

Key Features

• 7 inches diameter with 1-1/4 inches arbor hole for compatibility with common stationary tool spindles
• 1/32 inches thickness minimizes material loss and reduces cut time on steel
• Aluminum oxide abrasive grain at 60 grit for aggressive ferrous metal cutting
• Resinoid bond with Type 1 (flat) profile rated for stationary tool use
• Reinforced construction supports sustained RPM loads up to 8500 RPM
• Hardness code T for durability across repeated cuts

Compatibility

Designed for use with stationary cutting tools. Rated for steel applications per the A60T US specification.

Installation Notes

Cut-off wheel mounting and replacement should be performed by qualified personnel following ANSI B7.1 safety standards for abrasive wheels. Always inspect the wheel for cracks or chips before mounting and perform a ring test. Confirm the spindle speed of the host tool does not exceed 8500 RPM before operation. Never exceed the rated maximum RPM marked on the wheel, and always use the appropriate guard for the tool.