Value Collection CA6044U41 Cut-off Wheel 6in Aluminum Oxide

Product Description

The VALUE COLLECTION CA6044U41 is a Type 1 flat cut-off wheel designed for aggressive cutting on steel and ferrous materials. At 6 inches in diameter and 1/16 inch thick, it produces narrow, clean kerfs with minimal material loss. The wheel is built on an aluminum oxide abrasive grain at 46 grit, bonded with a resinoid bond and reinforced for durability under high-speed operation. It is rated to a maximum of 10,200 RPM and fits arbors with a 1/2 inch hole. Licensed tradespeople and shop technicians reach for this wheel when straight, fast cuts are needed on pipe, bar stock, or sheet steel.

This cut-off wheel is intended for use with circular saws and compatible right-angle or chop-style grinders that accept a 6 inch, 1/2 inch arbor wheel. Its primary application is cutting steel and ferrous metals in fabrication, maintenance, and repair settings. The 46-grit aluminum oxide grain is well matched to structural steel, conduit, and mild steel bar stock. It is equally suited to light industrial shops and field service work where consistent cut quality and wheel integrity under load are required.

Key Features

• Aluminum oxide abrasive at 46 grit for fast stock removal on steel
• Reinforced resinoid bond construction for high-speed structural integrity
• Type 1 flat wheel profile delivers straight, narrow cuts with minimal kerf waste
• 10,200 RPM maximum speed rating for use with standard circular and angle-cut saws
• 1/2 inch arbor hole fits common saw spindles without an adapter
• Hardness code T provides a firm bond suited to steel cutting applications

Compatibility

Designed for use with circular saws and compatible power tools that accept a 6 inch diameter, 1/2 inch arbor cut-off wheel rated for Type 1 mounting. Verify the tool spindle speed does not exceed 10,200 RPM before mounting.

Installation Notes

Cut-off wheel mounting and operation should be performed by qualified personnel familiar with abrasive wheel safety standards, including ANSI B7.1 guidelines. Always power down and disconnect or de-energize the tool before changing wheels, and confirm the spindle speed rating of the tool does not exceed the 10,200 RPM wheel rating. Inspect the wheel for cracks or chips before each use and never use a damaged wheel. Eye protection, face shields, and appropriate PPE are required during operation.