Value Collection CA3022U62 Cut-off Wheel 3 in Aluminum Oxide

Product Description

The VALUE COLLECTION CA3022U62 is a Type 1 aluminum oxide cut-off wheel designed for straight, narrow cutting operations on steel and ferrous materials. The wheel measures 3 inches in diameter, 1/32 inches thick, with a 1/4 inches arbor hole. It carries a 60-grit rating and a maximum operating speed of 25,000 RPM. The reinforced construction helps resist shattering under lateral load, making it a reliable choice for die grinder work in fabrication, maintenance, and mechanical repair applications. Licensed tradespeople and skilled DIYers install and replace these wheels regularly during metal cutting tasks.

This cut-off wheel is intended for use with die grinders in applications involving steel. The Type 1 (flat) profile suits straight plunge and slotting cuts. The 1/4 inches hole size is standard for most die grinder mandrels. The 3 inches diameter keeps the wheel compact for work in confined spaces, such as cutting bolts, tubing, sheet metal edges, and small structural sections. It is suited for both shop and field use wherever a die grinder is the tool of choice.

Key Features

• Aluminum oxide abrasive with reinforced fiberglass construction for durability under load
• 60 grit provides an aggressive cut rate suitable for ferrous metals including steel
• 25,000 RPM maximum operating speed matches standard die grinder output
• Type 1 flat profile for straight cuts, slotting, and plunge work
• 1/4 inches arbor hole fits standard die grinder mandrels without adapters
• Compact 3 inches diameter for cutting in tight or restricted areas

Compatibility

Designed for use with die grinders accepting a 1/4 inches arbor mandrel. Rated for cutting steel per the A60T specification.

Installation Notes

Cut-off wheels must be mounted and changed by operators familiar with abrasive wheel safety per ANSI B7.1 standards. Always power down and disconnect the die grinder before changing wheels. Inspect the wheel for cracks or chips before mounting and never exceed the marked maximum RPM. Eye protection and appropriate PPE are required during operation.