Value Collection BS26N0009 No. 9 Hss Jobber Drill Bit

Product Description

The VALUE COLLECTION BS26N0009 is a No. 9 wire-size jobber-length drill bit ground from high speed steel (HSS) and supplied with a bright, uncoated finish. It cuts a 0.1960-inch diameter hole with a 140-degree split-point angle that helps the bit self-center on entry and reduces the thrust force needed to start a cut. The fast-spiral flute geometry promotes rapid chip evacuation, keeping the cutting zone clear during production drilling. At 3.625 inches overall length with a 2.4375-inch flute length, it fits standard drill chucks and drill presses used daily in fabrication, maintenance, and field-service environments. Licensed trades and general machinists alike reach for this bit when drilling steel, aluminum, and non-ferrous metals at moderate feeds and speeds.

The BS26N0009 is suited for general-purpose drilling in light-to-medium production and repair work. Primary workpiece materials include steel, aluminum and other non-ferrous alloys, and wood. The straight cylindrical shank seats securely in three-jaw drill chucks on handheld drills, drill presses, and CNC turret setups that accept straight-shank tooling. The web-thinned, tapered-web construction reduces cutting resistance when breaking through thicker stock, making this bit practical for sheet metal, structural steel, and composite assemblies encountered in HVAC, electrical, and plumbing rough-in work.

Key Features

• No. 9 wire size, 0.1960-inch cutting diameter for precise hole sizing
• 140-degree point angle with web thinning for self-centering and reduced thrust
• Fast-spiral flute design accelerates chip evacuation in deep or interrupted cuts
• High speed steel construction handles steel, aluminum, non-ferrous metals, and wood
• Bright uncoated finish for easy visual inspection of cutting-edge condition
• Straight cylindrical shank fits standard 3-jaw chucks without adapters

Compatibility

Designed as a general-purpose replacement or stock bit compatible with any drill press, handheld drill, or turret machine accepting a straight-shank bit with a 0.1960-inch shank diameter.

Installation Notes

Secure the shank fully in the chuck and verify concentricity before running the spindle. Disconnect or de-energize the drill press or power tool before changing bits, following standard lockout/tagout procedures. Use appropriate cutting fluid or lubricant when drilling steel to extend cutting-edge life; no coolant-through capability is present on this bit. Wear eye protection and ensure the workpiece is clamped — never hand-hold sheet stock during drilling.