Value Collection BDNA-9990 O-ring Dash 215 Nbr 1-1/16 in Id

Product Description

The VALUE COLLECTION BDNA-9990 is a Dash 215 O-ring manufactured from Nitrile Butadiene Rubber (NBR) with a 1-1/16 inch inside diameter and a 1/8 inch cross-section thickness. NBR compound provides solid resistance to petroleum-based fluids, hydraulic oils, and water, making this O-ring a standard sealing solution in plumbing, HVAC, and fluid-handling assemblies. The round cross-section profile seats evenly in standard O-ring grooves, delivering consistent compression and reliable static or dynamic sealing. Licensed plumbers, HVAC technicians, and industrial maintenance professionals typically stock Dash 215 O-rings as a routine replacement seal for valves, fittings, pumps, and manifold connections.

This O-ring is suited for residential and light commercial applications where an inch-series Dash 215 seal is required. Common install scenarios include replacement of worn or brittle seals in ball valves, service port fittings, pump housings, and refrigeration service valves. Its NBR composition performs across a broad temperature range, making it appropriate for both chilled-water and hot-water system sealing points. Plumbers and HVAC technicians frequently use this size when servicing copper or brass fittings that call for a standard Dash 215 replacement. Minimum order quantity is 25 pieces; each package contains 1 unit.

Key Features

• Dash 215 inch-series sizing for direct drop-in replacement in standard O-ring grooves
• 1-1/16 inch inside diameter with 1/8 inch round cross-section thickness
• Nitrile Butadiene Rubber (NBR) material resists petroleum-based oils, hydraulic fluids, and water
• Round cross-section profile ensures even seat contact and consistent compression seal
• Inch-system dimensioning compatible with standard SAE and plumbing hardware

Compatibility

Designed as an OEM-style replacement for any application requiring a Dash 215 inch-series O-ring in Nitrile Butadiene Rubber, including valves, fittings, pump housings, and fluid-handling components that specify a 1-1/16 inch ID by 1/8 inch cross-section seal.

Installation Notes

O-ring replacement is performed by licensed plumbers or HVAC technicians; always depressurize and drain the affected system before disassembling any fitting or valve. Inspect the groove for nicks, corrosion, or debris before seating the new O-ring. Apply a compatible lubricant approved for NBR material and the system fluid to ease installation and prevent tearing during assembly. Do not stretch the O-ring beyond its natural elasticity when seating it in the groove.