Value Collection BDNA-9971 O-ring Dash 006 Nbr 1/8 in Id

Product Description

The VALUE COLLECTION BDNA-9971 is a Dash 006 nitrile butadiene rubber (NBR) O-ring with a round cross section, 1/8 inch inside diameter and 1/16 inch thickness. NBR compound provides reliable resistance to petroleum-based oils, fuels, and hydraulic fluids, making this O-ring a standard sealing component across HVAC, plumbing, and fluid-handling applications. The round cross section seats cleanly in standard O-ring grooves machined to Dash 006 specifications. Licensed trade professionals and maintenance technicians install this type of seal during equipment servicing, valve rebuilding, and connector assembly work.

This O-ring is suited for use in low-pressure fluid and gas sealing applications found in residential and light commercial HVAC systems, refrigeration equipment, plumbing valves, fittings, and hydraulic assemblies. Its NBR material performs well in contact with mineral oils, water, and many common refrigeration service fluids. The Dash 006 designation follows the AS568 standard sizing series, allowing direct cross-reference to other manufacturers supplying the same dash number. Minimum order quantity is 50 pieces; parts are packaged individually.

Key Features

• Dash 006 sizing per AS568 standard — 1/8 inch inside diameter, 1/16 inch thickness
• Nitrile butadiene rubber (NBR/Buna-N) compound resists petroleum oils, hydraulic fluids, and water
• Round cross section for consistent groove seating and even compression load
• Lightweight at 0.01 pounds — suitable for high-quantity service kits and parts inventory
• Minimum order quantity of 50 units supports bulk stocking for service fleets and shop inventory

Compatibility

Designed as an OEM-style replacement or service seal for any application calling for a Dash 006 NBR O-ring with 1/8 inch inside diameter and 1/16 inch cross-section thickness.

Installation Notes

O-rings of this type are installed by HVAC technicians, plumbers, and hydraulic system technicians during valve, fitting, and connector service. Always depressurize and de-energize the system before replacing seals. Lubricate the O-ring with a compatible fluid or assembly lubricant before installation to prevent tearing during seating. Inspect the groove for burrs or damage before installing the new seal.