Value Collection BDMP1069 Oil Drain Plug Gasket 1/2 Sae

Product Description

The VALUE COLLECTION BDMP1069 is a 1/2 SAE oil drain plug gasket designed to seal the oil drain plug on engine oil pans in automotive and light equipment applications. The gasket creates a leak-free seal between the drain plug and the oil pan mating surface, preventing oil seepage after an oil change or drain plug service. Each package contains 20 gaskets, making this a practical shop supply for technicians who perform high-volume oil service work. Sized to fit 1/2 SAE drain plugs, this gasket is a direct-fit consumable intended to be replaced at each oil drain interval.

This gasket is used in routine oil service on passenger vehicles, light trucks, and small equipment with oil pans that accept a 1/2 SAE drain plug. It is a standard shop supply item stocked by automotive technicians, fleet service shops, and general repair facilities. The pack quantity of 20 units is well suited to shops replacing drain plug gaskets as a matter of course during every oil change service rather than reusing the original gasket.

Key Features

• Sized for 1/2 SAE drain plugs for consistent fitment
• Pack of 20 gaskets supports high-volume oil service operations
• Designed as a single-use replacement gasket to be swapped at each drain interval
• Lightweight at 0.01 pounds per unit, minimizing added hardware weight
• UNSPSC Code 31401500 for procurement and catalog classification

Compatibility

Designed as an OEM-style replacement drain plug gasket for oil pans accepting a 1/2 SAE threaded drain plug. No specific vehicle or equipment model compatibility was provided in the product data.

Installation Notes

Oil drain plug gasket replacement is a standard task performed by automotive technicians and general service mechanics. Always allow the engine to cool and drain all oil before removing the drain plug. Discard the used gasket and seat the new gasket flat against the drain plug flange before reinstalling. Torque the drain plug to the vehicle or equipment manufacturer specification — do not over-tighten, as this can distort or extrude the gasket and damage the oil pan threads.