Value Collection BD3266 Mounted Flap Wheel 60 Grit

Product Description

The VALUE COLLECTION BD3266 is a mounted flap wheel designed for light deburring, blending, and surface finishing on metal and other hard materials. It features an aluminum oxide abrasive coating rated at medium grade with a 60 grit designation, making it well suited for moderate material removal and edge smoothing. The wheel mounts via a 1/4 inch shank for use in standard die grinders and drill presses. With a maximum rated speed of 25,000 RPM, it delivers consistent cut on both ferrous and non-ferrous workpieces. Machinists, tool-and-die technicians, and fabricators typically reach for this style of wheel for interior bore finishing and contoured surface work.

This mounted flap wheel is used in metal fabrication shops, maintenance environments, and production finishing applications. It is sized at 2 inches in diameter with a 1 inch face width, providing good contact area for cylindrical bores, die cavities, and curved surfaces. The coated aluminum oxide construction performs on steel, cast iron, aluminum, and similar materials. It is sold individually and is subject to a minimum order quantity of 10 units.

Key Features

• Aluminum oxide coated abrasive for reliable cut on ferrous and non-ferrous metals
• Medium grade, 60 grit for balanced stock removal and surface blending
• 2 inch outside diameter and 1 inch face width for solid surface contact
• 1/4 inch shank mount fits standard die grinders and drill chucks
• Rated to 25,000 RPM for use at full die grinder speeds
• No interleaf construction for direct abrasive contact throughout use

Compatibility

Designed as a standard 1/4 inch shank mounted flap wheel compatible with die grinders, flexible shaft machines, and drill presses that accept 1/4 inch accessories.

Installation Notes

Installation is performed by machinists or fabricators using a die grinder or similar rotary tool. Before mounting, confirm the tool spindle speed does not exceed the 25,000 RPM maximum rating of the wheel. Secure the shank fully in the collet or chuck and tighten to the tool specification before operation. Always use appropriate eye protection and guarding when operating abrasive wheels.