Value Collection BD3258 Mounted Flap Wheel 60 Grit

Product Description

The VALUE COLLECTION BD3258 is a mounted flap wheel designed for deburring, blending, and finishing operations on metal and other hard surfaces. It features an aluminum oxide abrasive coating rated at medium grade with a 60 grit designation, making it well suited for moderate stock removal and surface conditioning. The wheel mounts via a 1/4-inch shank for use in die grinders, rotary tools, and drill presses. With a 1-1/2-inch outside diameter and a 1/2-inch face width, it fits into confined areas and contoured surfaces where larger abrasive tools cannot reach. It is rated to a maximum of 30,000 RPM. Machinists, tool-and-die workers, fabricators, and maintenance technicians are the typical users.

This mounted flap wheel is used in metal fabrication shops, maintenance and repair operations, and light industrial environments. It handles internal bore finishing, weld blending on tubing, and surface prep on castings and forgings. The coated aluminum oxide construction handles ferrous and non-ferrous metals. Its compact diameter makes it practical for detail work inside ports, slots, and curved channels where flat or straight abrasive tooling is impractical.

Key Features

• Aluminum oxide coated abrasive for consistent cutting action on metal surfaces
• Medium grade, 60 grit — suited for moderate material removal and blending
• 1/4-inch shank mount compatible with standard die grinders and rotary tools
• 30,000 maximum RPM rating for high-speed tool use
• 1-1/2-inch diameter with 1/2-inch face width for access to tight and contoured areas
• Non-interleaf construction for direct abrasive contact

Compatibility

Designed for use with die grinders, rotary tools, and drill press setups equipped with a 1/4-inch collet or chuck. Suitable for ferrous metals, non-ferrous metals, and similar hard materials requiring surface conditioning or deburring.

Installation Notes

A licensed machinist or experienced fabricator should inspect the shank and wheel for damage before mounting. Secure the 1/4-inch shank fully into the collet and tighten per the tool manufacturer's specification before operation. Always verify the tool's rated RPM does not exceed the 30,000 RPM maximum of this wheel before running. Wear appropriate eye protection and follow applicable shop safety standards during use.