Value Collection BD3257 Mounted Flap Wheel 180 Grit

Product Description

The VALUE COLLECTION BD3257 is a shank-mounted flap wheel designed for fine surface finishing, deburring, and blending on metal and similar materials. Built with aluminum oxide abrasive on a coated construction, this wheel delivers consistent cut and finish at a very fine 180 grit rating. The 1/4-inch shank mounts directly into die grinders and rotary tools, spinning safely up to 30,000 RPM. At 1 inch in diameter with a 1-inch face width, it reaches into contoured surfaces, bores, and tight internal profiles where flat abrasives cannot conform. Machinists, tool and die workers, and metal fabricators rely on this style of wheel for final finishing passes before inspection or coating.

This mounted flap wheel is suited for use in fabrication shops, maintenance environments, and production finishing lines. It performs well on internal bores, tubing ends, weld seams, and curved profiles. The 180 grit rating makes it appropriate for final-stage surface prep, light deburring, and scratch refinement rather than heavy stock removal. It is used with handheld die grinders and bench-mounted flex-shaft tools across metalworking, aerospace component prep, and general industrial maintenance applications.

Key Features

• 180 grit aluminum oxide abrasive for very fine surface finishing and deburring
• 1-inch diameter and 1-inch face width for access to contoured and internal surfaces
• 1/4-inch shank for direct mounting in standard die grinders and rotary tools
• Rated to 30,000 RPM maximum for use with high-speed rotary equipment
• Coated abrasive construction provides consistent grit exposure through the wheel life
• No interleaf construction for direct abrasive contact on each flap

Compatibility

Designed as a direct-mount replacement-style flap wheel for standard 1/4-inch collet die grinders and rotary tools used in metalworking and industrial finishing applications.

Installation Notes

Installation is performed by inserting the 1/4-inch shank into a compatible die grinder collet and tightening to the tool manufacturer's specified torque. Always confirm the tool's maximum RPM rating meets or exceeds 30,000 RPM before mounting. Inspect the wheel for damage before each use and never exceed the rated maximum RPM. Appropriate eye protection and gloves should be worn during operation per standard shop safety practice.