Value Collection BD3065 Type 27 Grinding Wheel 9in 24G

Product Description

The VALUE COLLECTION BD3065 is a Type 27 depressed center grinding wheel designed for aggressive material removal on metal surfaces. Built with aluminum oxide abrasive and a coarse 24-grit rating, it delivers fast stock removal on steel, iron, and similar ferrous materials. The resinoid bond holds abrasive grains firmly during high-load applications, and the hard grade wheel maintains its shape under sustained pressure. Rated to a maximum of 6,600 RPM, this wheel is intended for use with large-format angle grinders and compatible grinding equipment operated by trade professionals and fabricators.

This wheel is suited for weld grinding, surface preparation, and heavy deburring in industrial, fabrication, and construction environments. The 5/8-11 threaded hole provides a direct mount to standard angle grinder spindles. Its 9-inch diameter and 1/4-inch thickness make it appropriate for high-material-removal tasks where a smaller wheel would require excessive passes. Coarse 24-grit aluminum oxide is a common choice for initial weld dressing and scale removal before finishing operations.

Key Features

• Type 27 depressed center profile for flat and beveled surface grinding
• Aluminum oxide abrasive with 24-grit coarse rating for aggressive stock removal
• Resinoid bond construction for durability under sustained grinding load
• Hard wheel grade with hardness code U for extended wheel life
• 5/8-11 threaded connector for direct mount to standard angle grinder spindles
• 6,600 RPM maximum speed rating

Compatibility

Designed for use with 9-inch angle grinders equipped with a 5/8-11 threaded spindle. Verify that the grinder's rated no-load RPM does not exceed the 6,600 RPM maximum speed of this wheel before installation.

Installation Notes

Installation should be performed by a qualified operator familiar with abrasive wheel safety. Always power down and disconnect the grinder from its power source before mounting or removing the wheel. Inspect the wheel for cracks or chips before each use and never operate above the marked maximum RPM. Eye protection, a face shield, and appropriate PPE are required during operation per ANSI B7.1 guidelines.