Value Collection BD3044 Type 1 Cutoff Wheel 6in 60 Grit

Product Description

The VALUE COLLECTION BD3044 is a Type 1 straight cutoff wheel designed for aggressive cutting on steel and stainless steel. It measures 6 inches in diameter with a 0.045-inch thickness and a 7/8-inch arbor hole. The wheel is constructed from reinforced aluminum oxide abrasive rated at 60 grit, delivering a balance of cut speed and edge durability on hard metals. Rated to a maximum of 10,200 RPM, it is sized for use on standard 6-inch angle grinders and cutoff tools common in fabrication, welding, and mechanical service environments.

This cutoff wheel is suited for trade professionals performing cut-off work on mild steel, structural steel, and stainless steel stock. Typical applications include cutting pipe, bar stock, sheet metal, and weld cleanup preparation. The thin 0.045-inch kerf minimizes material loss and reduces heat buildup during cuts, making it appropriate for both shop and field use by welders, pipefitters, ironworkers, and general mechanical contractors.

Key Features

• Type 1 flat profile for straight cutoff cuts on metal stock
• Reinforced aluminum oxide construction rated for steel and stainless steel
• 60 grit abrasive for fast, aggressive cutting action
• 0.045-inch thin kerf reduces heat and material loss
• 10,200 maximum RPM rating for use on standard angle grinders
• 7/8-inch arbor hole fits common grinder spindle sizes

Compatibility

Designed for use on 6-inch angle grinders and cutoff tools with a 7/8-inch arbor, compatible with applications on steel and stainless steel workpieces. Verify that the grinder's rated speed does not exceed 10,200 RPM before mounting.

Installation Notes

Mounting and wheel changes must be performed by qualified personnel following ANSI B7.1 safety standards for the use, care, and protection of abrasive wheels. Always inspect the wheel for cracks or damage before mounting and never operate above the marked maximum RPM. Ensure the grinder is powered off and unplugged before changing wheels. Use the correct flanges and tighten the arbor nut to the grinder manufacturer's specification without over-tightening.