Value Collection BD-29892 Cartridge Time Delay Fuse 5A

Product Description

The VALUE COLLECTION BD-29892 is a mini cartridge time delay fuse rated at 5 amps and 250 volts, constructed with a glass fuse body. Time delay fuses are designed to tolerate brief inrush currents without nuisance tripping, making them well suited for protecting motors, transformers, and control circuits that draw elevated current at startup. At 1.25 inches overall length and 0.25 inches diameter, this is a standard mini cartridge form factor commonly found in HVAC control panels, low-voltage circuits, and light commercial equipment. Licensed electricians and HVAC technicians are the primary installers for this type of overcurrent protection device.

This fuse is appropriate for use in residential and light commercial applications where a mini cartridge time delay fuse at 5 amps and 250 volts is specified. Typical install scenarios include control board fuse holders, equipment disconnect panels, and secondary circuit protection in HVAC, refrigeration, and electrical distribution equipment. This SKU is sold in a pack of 5, making it a practical bench stock item for service technicians who replace blown fuses during diagnostic and repair calls.

Key Features

• Time delay design tolerates motor and transformer inrush current without nuisance tripping
• 5 amp, 250 volt rating suitable for low-voltage control and secondary circuits
• Mini cartridge form factor at 1.25 inches OAL and 0.25 inches diameter
• Glass fuse body allows visual confirmation of blown element without a meter
• CSA Certified and UL Listed for compliance with standard electrical codes
• Sold in a pack of 5 for efficient bench stock and service inventory

Compatibility

Designed as a direct-replacement mini cartridge time delay fuse for any fuse holder accepting a 0.25 inch diameter by 1.25 inch overall length cartridge fuse rated at 5 amps and 250 volts.

Installation Notes

Fuse replacement must be performed by a qualified electrician or licensed HVAC technician. Always de-energize the circuit and verify zero voltage with a meter before removing or installing a fuse. Replace only with a fuse of identical amp rating, voltage rating, and time delay classification as specified on the equipment label. Never substitute a fuse with a higher amp rating to resolve repeated blowing, as this indicates an underlying fault that requires diagnosis.