Value Collection B240 50X32 Black Reducing Coupling 2x1-1/4 in

Product Description

The VALUE COLLECTION B240 50X32 is a black malleable iron reducing coupling designed for threaded pipe connections transitioning from 2-inch to 1-1/4-inch pipe. Rated at Class 150 with a liquid and gas pressure rating of 300 psi, this fitting handles both gas and liquid service in demanding installations. The black finish provides corrosion resistance suited to dry and moderate-exposure environments. It meets a broad set of international and domestic standards, making it appropriate for commercial and industrial piping work where compliance is required. Licensed plumbers and pipefitters install this fitting in new construction and retrofit applications.

This reducing coupling is used in residential and commercial gas piping, fire protection, and industrial plumbing systems where a reduction from 2-inch to 1-1/4-inch threaded pipe is needed. Its Class 150 malleable iron construction is appropriate for above-ground and exposed indoor piping runs. The fitting is sold individually and is well suited to service work, small system extensions, or new rough-in where a single coupling is required.

Key Features

• Reduces 2-inch threaded pipe to 1-1/4-inch threaded pipe in a single fitting
• 300 psi pressure rating for liquid and gas service
• Malleable iron construction with black finish for durability in indoor piping
• Class 150 rated per standard industry classification
• Multi-standard certified: ABNT, EN 10242, FM Approved, GB/T 3287, GB/T 7306.2, ISO 7/1, cULus Listed
• Threaded end connections for straightforward installation with standard pipe dies and thread sealant

Compatibility

Designed as an OEM-style replacement or new-installation fitting for threaded black iron piping systems using 2-inch by 1-1/4-inch connections in gas, fire suppression, or general plumbing applications.

Installation Notes

Installation is performed by a licensed plumber or pipefitter following applicable codes such as the IPC or IFGC. Shut off and depressurize the pipe system completely before cutting or threading. Apply an appropriate pipe thread sealant or PTFE tape rated for the service medium before making up the joint. Do not over-tighten; use a strap wrench or pipe wrench with a backup wrench on the adjacent fitting to avoid stressing the pipe.