Value Collection B130R 50X25 Black Tee Reducer 2x2x1 Npt

Product Description

The VALUE COLLECTION B130R 50X25 is a malleable iron black tee reducer fitting designed for threaded pipe systems in industrial, commercial, and mechanical piping applications. It features a Class 150 pressure rating with a 300 psi liquid and gas pressure rating, making it suitable for moderate-pressure pipe runs carrying water, air, gas, or other compatible media. The black finish is standard for gas-service and general mechanical piping. All three ports use NPT threaded connections. This fitting is installed by licensed plumbers, pipefitters, and mechanical contractors working on low-to-medium pressure systems.

This tee reducer is used where a branch outlet of a different size is required in a threaded malleable iron pipe system. The run size is 2 inches by 2 inches and the branch outlet is 1 inch, allowing a single larger pipe run to feed a smaller branch line. Typical installations include gas distribution headers, compressed air systems, fire protection systems, and general industrial fluid piping where threaded malleable iron fittings are specified. The fitting meets multiple international and domestic standards, making it suitable for a wide range of project specifications.

Key Features

• Malleable iron construction provides strength and impact resistance in threaded pipe systems
• Black finish suited for gas-service and general mechanical piping applications
• Class 150 fitting rated to 300 psi for liquid and gas service
• NPT threaded connections on all ports for standard wrench-made joints
• Meets ABNT, EN 10242, FM, GB/T 3287, GB/T 7306.2, ISO 7/1, and cULus listed standards
• Tee configuration with reducing branch: 2 inches x 2 inches run, 1 inch branch

Compatibility

Designed as an OEM-style replacement or new-installation fitting for Class 150 malleable iron threaded pipe systems using NPT connections in 2-inch run by 1-inch branch configurations.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable mechanical and plumbing codes, including the IPC and IFGC where applicable. Shut off and depressurize the pipe system completely before removing or installing any fitting. Apply an appropriate thread sealant or PTFE tape to NPT threads before assembly and tighten with pipe wrenches to achieve a proper seal without over-stressing the fitting. Do not exceed the rated working pressure for the fitting or the connected piping system.