Value Collection B-L9005 Malleable Iron 90 Elbow 1/2 in

Product Description

The VALUE COLLECTION B-L9005 is a malleable iron 90 degree elbow fitting with a black finish, designed for threaded pipe connections in Class 150 piping systems. Sized at 1/2 inch, it carries a liquid and gas pressure rating of 300 psi, making it suitable for a range of low- to moderate-pressure service lines. The black finish is standard for gas distribution and similar piping applications. Licensed plumbers, pipefitters, and HVAC technicians install this fitting as part of threaded black iron piping assemblies in both residential and light commercial settings.

This elbow is commonly used in natural gas, propane, compressed air, and similar fluid or gas distribution systems where a 90 degree directional change is required in a 1/2 inch threaded line. Its malleable iron construction provides the ductility and strength needed to withstand installation torque and system vibration. Typical install scenarios include gas branch lines, boiler piping, and air compressor distribution runs.

Key Features

• Malleable iron construction provides ductility and resistance to cracking under stress
• Black finish suitable for gas and general-purpose piping systems
• 300 psi liquid and gas pressure rating for Class 150 service
• 1/2 inch threaded end connections for standard NPT assembly
• 90 degree elbow geometry for right-angle directional changes in piping runs

Compatibility

Designed as an OEM-style replacement or new-installation fitting for 1/2 inch threaded black iron piping systems rated at Class 150 service conditions.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable local codes and the International Fuel Gas Code (IFGC) or International Plumbing Code (IPC) where relevant. Shut off gas or fluid supply and depressurize the line before disassembly or fitting installation. Apply an appropriate thread sealant or PTFE tape rated for the service medium to all threaded joints. Do not over-torque malleable iron fittings, as excessive force can crack the fitting body.