Value Collection B-L9003 90 Elbow 3/8 Inch Malleable Iron

Product Description

The VALUE COLLECTION B-L9003 is a 3/8 inch malleable iron 90 degree elbow with a black finish, designed for threaded pipe installations in plumbing, gas distribution, and HVAC piping systems. Rated at Class 150 with a liquid and gas pressure rating of 300 psi, this fitting handles standard service demands in both residential and light commercial applications. The malleable iron construction provides the ductility needed to withstand mechanical stress and vibration in working pipe systems. Plumbers, pipefitters, and HVAC mechanics install this fitting where a 90 degree direction change is required on 3/8 inch threaded iron pipe runs.

This elbow is suited for use in gas supply lines, steam and water distribution piping, and low-pressure pneumatic systems where threaded malleable iron fittings are specified. The black finish indicates standard carbon steel alloy content without galvanizing, which is appropriate for natural gas and propane service as well as many industrial fluid systems. It is a common choice in residential gas appliance rough-in work and commercial piping where Class 150 fittings meet code requirements.

Key Features

• 3/8 inch threaded end connections for standard NPT pipe assembly
• Malleable iron construction provides impact resistance and ductility under load
• Class 150 rating with 300 psi liquid and gas pressure capacity
• Black finish suitable for gas service and non-corrosive fluid applications
• 90 degree turn geometry for direction changes in tight piping layouts

Compatibility

Designed as an OEM-style replacement or new-installation fitting for 3/8 inch NPT threaded iron pipe systems rated at Class 150 or lower pressure service.

Installation Notes

Installation should be performed by a licensed plumber, pipefitter, or qualified HVAC technician in accordance with applicable local mechanical and plumbing codes. Shut off and depressurize the pipe system completely before disassembling any existing fittings. Apply listed pipe thread sealant or PTFE tape to male threads before assembly, and tighten to a snug, leak-free connection without overtightening. On gas service applications, verify all joints with an approved leak-detection solution or meter before restoring pressure.