Value Collection 97182 Hex Head Cap Screw 3/4-10 X 5 in Grade 5

Product Description

The VALUE COLLECTION 97182 is a 3/4-10 x 5 inch hex head cap screw manufactured from Grade 5 steel with an uncoated finish. It features partial threading along the shank and is dimensioned to the UNC thread standard. The fastener conforms to ASME B18.2.1, the governing specification for inch-series hex bolts and screws. Length is measured under the head. This screw is used by tradespeople, contractors, and maintenance technicians across mechanical, structural, and equipment assembly applications where a standard-strength steel fastener is required.

This cap screw is suited for general industrial and construction fastening work where 3/4-10 UNC threading is specified. The 5-inch length under the head accommodates thicker assemblies, flanged connections, and structural joints. Partial threading allows for full bearing contact in the unthreaded shank zone, which is preferred in bolted joints subject to shear loading. Sold in a package quantity of 25 units, making it practical for both single-use repair jobs and recurring maintenance needs.

Key Features

• Thread size 3/4-10 UNC, conforming to ASME B18.2.1 inch-series hex cap screw standard
• 5-inch length under the head accommodates thick structural and mechanical assemblies
• Grade 5 steel construction provides medium-strength tensile performance for general fastening
• Partially threaded shank improves shear resistance in bolted joint applications
• Uncoated finish suitable for use as-is or for field painting, plating, or coating by the installer
• Package quantity of 25 units per order

Compatibility

Designed as a standard replacement or new-installation hex head cap screw for any assembly specifying a 3/4-10 UNC x 5 inch Grade 5 partially threaded fastener per ASME B18.2.1.

Installation Notes

Installation should be performed by a qualified mechanic, ironworker, or maintenance technician familiar with bolted joint procedures. Always verify mating thread condition and clean threads before installation. Apply appropriate torque per the joint design specification using a calibrated torque wrench. Do not substitute Grade 5 fasteners in applications that specify Grade 8 or higher without verifying structural adequacy with the design engineer.