Value Collection 934-000-126 Square End Mill Hss

Product Description

The VALUE COLLECTION 934-000-126 is a single-end square end mill ground from high speed steel (HSS) and designed for general-purpose milling in ferrous and non-ferrous materials. It features a 3/32-inch cutting diameter, a 17/64-inch length of cut (LOC), and a 3/16-inch straight shank for use in standard collets and end mill holders. The 40-degree helix angle promotes efficient chip evacuation and smooth cutting action. With two flutes and a bright, uncoated finish, this tool is suited for light-duty slotting, profiling, and peripheral milling where coolant-through capability is not required. Centercutting geometry allows direct plunge entry into the workpiece.

This end mill is appropriate for use in manual mills, CNC machining centers, and toolroom applications where small-diameter, close-tolerance work is required. The 1-1/2-inch overall length keeps the tool compact and rigid, reducing deflection during light finishing passes. It is a practical choice for prototype work, die and mold detail work, and general job-shop machining operations that call for a small-footprint cutting tool in HSS. Right-hand cut and right-hand flute orientation are standard for conventional spindle setups.

Key Features

• 3/32-inch cutting diameter with a -0.0010 to +0.0000-inch diameter tolerance for close-fit applications
• 17/64-inch length of cut suits shallow slotting and profiling passes
• 40-degree helix angle supports efficient chip flow and reduced cutting forces
• Centercutting design allows plunge milling without a pre-drilled entry hole
• Bright, uncoated finish works well in non-ferrous metals and general HSS applications
• Series 846 single-end configuration with straight shank and regular length

Compatibility

Designed as a standard-shank square end mill compatible with 3/16-inch collets and end mill holders used on manual knee mills, CNC vertical machining centers, and toolroom milling equipment.

Installation Notes

Installation should be performed by a qualified machinist or toolroom technician. Power down and lock out the machine spindle before inserting or removing the end mill from the holder. Ensure the straight shank is fully seated and the collet or set-screw holder is torqued to the equipment manufacturer's specification. Inspect the cutting edges for chipping or wear before each use, and never exceed the recommended speed and feed range for the workpiece material and tool diameter.