Value Collection 86348208 D2 Tool Steel Flat Stock

Product Description

The VALUE COLLECTION 86348208 is a D2 tool steel flat stock bar used in tool and die making, fabrication, and machine shop applications. Measuring 18 inches in overall length, 2 inches in overall width, and 3/4 inches thick, this flat stock delivers the dimensional consistency required for precision tooling work. D2 is a high-carbon, high-chromium tool steel known for its wear resistance and ability to hold a sharp edge after heat treatment. At 7.68 pounds, this bar is sized for workbench and mill handling without additional cutting. Machinists, tool and die makers, and fabricators are the primary users of this material.

This flat stock is suited for producing punches, dies, gauges, knives, and wear parts where tight dimensional tolerances are required. The close width, thickness, and squareness tolerances make it appropriate for applications where material goes directly to finish machining with minimal cleanup stock removal. It is commonly used in both job shop and production environments where D2 tool steel is the specified material.

Key Features

• D2 tool steel construction for high wear resistance and edge retention after hardening
• Overall length of 18 inches with a length tolerance of +0.062 inches
• Overall width of 2 inches with a width tolerance of +0.010 to 0.015 inches
• Thickness of 3/4 inches with a thickness tolerance of +0.010 to 0.015 inches
• Square tolerance of 0.010 to 0.015 inches for consistent perpendicularity
• Weight of 7.68 pounds per piece

Compatibility

Designed as a general-purpose D2 tool steel flat bar suitable for use in tool and die, punch and die, and precision fabrication applications where D2 material specification is required.

Installation Notes

Machining and finishing of D2 tool steel flat stock should be performed by qualified machinists or tool and die makers using appropriate cutting tools rated for high-alloy tool steel. Carbide tooling is typically required for milling and turning operations. Heat treatment to achieve full hardness should be performed by a qualified heat treat facility following the material manufacturer's recommended thermal cycle for D2 steel. Always inspect stock dimensions before machining to confirm they meet drawing requirements.