Value Collection 842-0093 Square End Mill 3/32 in 2 Flute Hss

Product Description

The VALUE COLLECTION 842-0093 is a double-end, two-flute square end mill designed for precision milling operations in metal, plastic, and composite materials. Built from high speed steel with a bright/uncoated finish, this stub-length cutter features a 3/32 inch (0.0938 inch) mill diameter and a 9/64 inch (0.1406 inch) length of cut. The 30-degree helix angle promotes efficient chip evacuation and smooth cutting action. At 2 inches overall length with a 3/16 inch straight shank, it is well suited for manual mills, CNC machining centers, and toolroom applications. Machinists and tool and die professionals are the primary installers of this tooling.

This end mill is used in light-duty milling, slotting, and profiling operations where a small-diameter cutter is required. The double-end design doubles usable tool life by providing two cutting ends on a single blank. The stub length provides added rigidity at small diameters, reducing deflection during cuts. Typical applications include precision detail work, keyway cutting, and contouring in ferrous and non-ferrous materials in job shop and production environments.

Key Features

• Double-end design provides two usable cutting ends per tool
• High speed steel construction suitable for a broad range of workpiece materials
• 30-degree helix angle for efficient chip flow and reduced cutting forces
• Stub length geometry increases rigidity and minimizes deflection at 3/32 inch diameter
• Center-cutting capable, allowing plunge entry into the workpiece
• Right-hand cut and right-hand flute direction for standard spindle operation

Compatibility

Designed for use in milling machines and machining centers that accept a 3/16 inch straight shank end mill. Fits standard collets and end mill holders sized for 3/16 inch shank tooling.

Installation Notes

Installation is performed by machinists using a collet chuck or end mill holder rated for the 3/16 inch straight shank diameter. Ensure the spindle and machine power are fully off and the spindle is locked before changing tooling. Seat the shank to the recommended engagement depth specified by the holder manufacturer and verify runout with a dial indicator before beginning a cut. Do not exceed the rated speed and feed for high speed steel tooling in the material being machined.