Value Collection 835-012SR Pvc Female Adapter 1-1/4 in

Product Description

The VALUE COLLECTION 835-012SR is a 1-1/4-inch PVC reinforced female adapter designed to transition between slip and SR FIPT (solvent-weld socket to reinforced female iron pipe thread) end connections in plastic piping systems. Constructed from PVC, this fitting provides a corrosion-resistant, lightweight connection point suitable for water distribution, irrigation, and general plumbing lines. Plumbers and pipefitters install this adapter where a threaded female end is required at the termination of a PVC run. The reinforced female thread design adds wall thickness at the threaded end to reduce the risk of splitting under torque.

This fitting is suited for residential and light commercial plumbing, irrigation systems, and pool or spa plumbing where PVC pipe is the specified material. The slip end accepts a standard 1-1/4-inch PVC pipe or fitting for solvent-cement joining, while the SR FIPT end threads onto a male-threaded fitting or valve. It is commonly used at equipment connections, pump inlets, and valve assemblies where a plastic-to-threaded transition is needed.

Key Features

• Reinforced female thread end reduces cracking risk during assembly
• Slip inlet accepts standard 1-1/4-inch PVC pipe for solvent-cement joining
• PVC construction is corrosion-resistant and suitable for water service applications
• Compact single-unit fitting simplifies thread-to-slip transitions in PVC runs
• Lightweight at 0.46 pounds, reducing handling effort during installation

Compatibility

Designed as a standard replacement or new-installation fitting for 1-1/4-inch PVC piping systems using slip and SR FIPT end connections in plumbing, irrigation, and pool or spa applications.

Installation Notes

Installation should be performed by a licensed plumber or qualified pipefitter in accordance with applicable local plumbing codes and the International Plumbing Code (IPC). Shut off and depressurize the water supply before cutting into any existing line. Apply PVC primer and solvent cement to the slip end per manufacturer instructions; use PTFE thread tape or an approved thread sealant on the SR FIPT connection. Do not over-torque the threaded end, as PVC threads can crack under excessive force.